Cart
Checkout Secure

R Series Scorecard Holder

£10.00
Quantity
Checkout Secure

Free UK Delivery Over £150

1 Year Warranty

Replacement scorecard holder for the R1 Push

Fitting instructions:

1. Fully unscrew the knob that you use to adjust the height of the handle and remove the large coach bolt that it screws onto. Now gently pull apart the lower ends of the handle tubes and the handle will come off the trolley.
2. Turn the handle over and using a Phillips screwdriver remove the two clips that fix the handle compartment to the handle tubes: these are located either side of the drinks holder. Using the same Phillips screwdriver, also remove the smaller two of four screws that secure the handle compartment to the tubes at the very top of the handle. The handle compartment will now be completely free of the tubes.
3. You will see three screws alongside the ball holder: these are are what fix the scorecard holder to the handle compartment. Unscrew them, again using a Phillips screwdriver, and the old scorecard holder will pull away from the other side.
4. Put the new scorecard holder in place and replace the three screws. Then replace the whole handle compartment onto the tubes and replace the screws and clips.
5. Finally, put the handle back onto the trolley, replace the coach bolt, and fully screw on the knob again.

Replacement scorecard holder for the R1 Push

Fitting instructions:

1. Fully unscrew the knob that you use to adjust the height of the handle and remove the large coach bolt that it screws onto. Now gently pull apart the lower ends of the handle tubes and the handle will come off the trolley.
2. Turn the handle over and using a Phillips screwdriver remove the two clips that fix the handle compartment to the handle tubes: these are located either side of the drinks holder. Using the same Phillips screwdriver, also remove the smaller two of four screws that secure the handle compartment to the tubes at the very top of the handle. The handle compartment will now be completely free of the tubes.
3. You will see three screws alongside the ball holder: these are are what fix the scorecard holder to the handle compartment. Unscrew them, again using a Phillips screwdriver, and the old scorecard holder will pull away from the other side.
4. Put the new scorecard holder in place and replace the three screws. Then replace the whole handle compartment onto the tubes and replace the screws and clips.
5. Finally, put the handle back onto the trolley, replace the coach bolt, and fully screw on the knob again.

Added to cart!
Free shipping when you order over £150 You Have Qualified for Free Shipping Spend $x to Unlock Free Shipping You Have Achieved Free Shipping Free Shipping For Over $x to Stewart Golf | Remote Electric Gold Trolleys You Have Achieved Free Shipping Free shipping when you order over £150 ou Have Qualified for Free Shipping