Building on the outstanding success of the R1 PUSH we are very proud to announce the NEW Colourful Stewart Golf R1-S PUSH trolley that is built by hand in Gloucestershire.
Now complete with 15 different colour variations, the R1-S PUSH has been branded ‘The best push trolley in the world’. Based on a novel application of the tried and tested rack & pinion system. Rack & pinion is most well known for use in car steering systems to turn the circular movement of turning a steering wheel, into the linear movement of the steering rack.
Specially designed self adjusting bag jaws will accommodate any style of stand, cart or tour bag, and an innovative new silicone bag strap both adjusts to bag size and grips at the same time.
The R1-S PUSH is based on a novel application of the tried and tested rack & pinion system. Rack & pinion is most well known for use in car steering systems to turn the circular movement of turning a steering wheel, into the linear movement of the steering rack.
The R1-S PUSH actually has 4 racks and 4 pinions that all work simultaneously. When folding the R1-S PUSH, it works as follows:
1. The main support is folded forwards, pivoting at its base.
2. At the base of the main support there is a large gear, or pinion. As this turns, it engages with the top side of the rear rack and moves it backwards in the horizontal tube.
3. The two lower sides on the rear rack connect to the front aero leg which has a pinion on. As the rack moves backwards linearly, the gear rotates and the leg closes until parallel with the horizontal tube.
4. The rear rack is connected to the front rack, so they both move backwards at the same time.
5. A further pinion mounted on top of the front rack is connected to the front wheel, so as the rack moves backwards the wheel folds under the horizontal tube.
6. The handle can be folded and adjusted by loosening the knob, and re-tightening when positioned.
Why is this better?
Any external sliding mechanism is subject to dust & dirt from the golf course. If not kept clean, this can lead the mechanism to become stiff and possibly even jam. The presence of abrasive dust or grit in a sliding mechanism can also cause damage to the surface finish.
The patented rack & pinion mechanism is all housed inside the tube, away from dust & dirt. Additionally, the oversized design of the gears can work even with debris present.
As well as the functional benefits described above, the rack & pinion system means that the aesthetic is impeccably clean. With the usual sliders missing, the key lines of the R1-S Push are allowed to really sing.
Folded without wheels
All three wheels are quick release for an even smaller folded size.
8.1kg / 17.9lbs
the product looks good and is very easy to erect and fold down.the trolley runs smoothly. I only gave the trolley 4 stars as I have 2 comments. First, the cradle at the top is narrower than my golf bag and it does not fit snugly into the base of the cradle (my bag is standard size). Secondly, I have found the trolley and bag to be unstable on uneven ground and have to be extra careful at times. Ron Wood on 15th May 2017
A very good looking and practical trolley. the best thing is that it folds up very small so I can get in the boot of the car! highly recommended jerry on 9th Mar 2017
Whilst buying a trolley in January doesn't really give you a chance to use your new toy immediately, there is no doubt in my mind that the R1-S will be a fantastic acquisition once winter passes. Easily deployed and fantastic looking, I was forced to upgrade my bag so it didn't look out of place on such a top-of-the-line trolley.
Truly recommended. David on 21st Feb 2017
The R1 S Push trolley is excellent. Strong, well constructed, easy to set up and has many additional features. My golfing buddies were full of praise and quite envious. I would thoroughly recommend it to anyone considering a new push trolley. Unknown on 7th Feb 2017
Absolutely love it . Great design, simple to put up and down.
Great buy Unknown on 22nd Jan 2017
This trolley replaces my trolley that I have used for the past three years, which has started to fall apart. I have been very pleased with the RS-1 Push trolley. It unfolds easily, is sturdy and moves very smoothly. It has not helped to improve my scores yet - but give it time! KEVIN BRICE on 15th Dec 2016
Essentially, this is the best push-cart on the market. This, however, is reflected by the price. The description provided by the producers and reviewers is close to completely honest. The trolleys folding mechanism is excellent as is the build quality. It should be noted that the trolley comes with 2 bag retainer straps of different lengths. These do not enable all cart bags to be accommodated as claimed. I had to purchase an additional 'long' retaining rubber strap (£15) in order to secure a standard cart-bag with a separate putter well as the 'short' retainer strap could not be used. Clifford Bonner on 23rd Oct 2016
Practical and very easy to use. I've used it for 4 or 5 rounds now and it's definitely the best push trolley I've had. It's very easy to fold/unfold and fits easily into the boot of the car. It takes just a few seconds to unfold and clipping the bag into the rubber bungee straps is very straightforward.
It's not the cheapest push trolley on the market but it is one of the best made! Unknown on 11th Sep 2016
Love my new R1-S push. It's been a game changer for me. Light to push around,great to pack in the car & looks like it means business! Richard Anderson on 8th Sep 2016
I needed a trolley that would fit in my MX 5 AND 911 and after extensive research the R 1 S was the only trolley to fit in both,the easy release wheels were needed for the MX5 and as stated the wheels could be removed and replaced easily
The R 1 S on the course is excellent in all respects , I only wish that my old 2 wheel trolley broke a few years ago !! Unknown on 30th Aug 2016
Q: Why is it called the R1-S Push?
A: The 'R' stands for 'rack' as this is the basis of the design, and '1' is because this is the first of a brand new design. We decided against continuing the Z Series names (Z1 and Z3 were our previous push trolleys) as a Z5 infers an iterative progression from a Z3, whereas the R1 is a completely new design so deserves a completely new name. The 'R' also stands for 'Ross' which is the first name of our Chairman Ross Stewart, who came up with the rack & pinion folding concept.
Q: Is the R1-S Push really built in Great Britain?
A: Yes every single one is built by hand in Gloucestershire, just like our exclusive X & F Series powered products. Parts for the R1-S Push are made by specialist manufacturers across the world, and then assembled by hand right here in Great Britain. This allows us to ensure every product meets our exacting standards before it reaches you.
Q: Will I be able to get spare parts?
A: Of course! As we build the R1-S Push in GB we have every part, you will be able to buy these from our eCommerce website or from your local distributor.
Q: How should I clean my R1-S Push?
A: You should just use a damp cloth to keep the trolley clean from dust or dirt. If your club has an airline you can use this to carefully blow any dust from the visible parts of the mechanism. It is not recommended that you use a pressure washer or hosepipe, water could get in to the tubes or damage the bearings.
Q: How does the R1-S Push compare against the Z Series trolleys?
A: Very well. The R1-S Push actually folds 33% smaller than the Z1/Z3 did, mostly thanks to the front wheel folding under the trolley and the rear wheels folding in further. Despite folding smaller, the R1-S Push has more features and 4 times more storage volume in the handle. Innovative placement of ball and umbrella holders make this even more significant, allowing you to store large items such as sunglasses inside the console.
Q: Why are the main tubes triangular not round or oval like other trolleys?
A: Louis Sullivan's famous axiom, “form follows function” is never truer than here. As you can see in the ‘how it works’ section, the rear wheels fold courtesy of two angled racks mated to a flat top rack. These angles are critical to the way the R1-S Push works, so it made sense to create a custom shaped tube to fit the angled racks perfectly.
In order to maintain continuity in the aesthetic, this same profile is used for the main upright tube. In addition, the ball marker also uses the same profile. This both echo’s the main shape of the machine, and also ensures the SG logo is always aligned correctly.
Q: Can I get hedgehog winter wheels for the R1-S Push?
A: Yes you will be able to. These are currently underway and we expect to have them by the time the winter comes around. If you sign up for the mailing list above or register your warranty, you’ll be emailed as soon as they are available.
Q: What do you mean, “can hold any bag”?
A: Many golfers who use a push trolley also like to carry sometimes. Stand/carry bags usually have a leg mechanism which then does not sit properly on a trolley. We have designed our bag jaws to grip the bags outer edges, allowing the mechanism to sit through the middle. This means your bag will be the ‘right way up’, allowing access to your pockets and clubs as the designers intended.